Cart 0
< Go Back

Combustible Gas Indicator

Combustible Gas Indicator

  • $ 64.99

Ask a Question

This Combustible Gas Indicator Tester can be used to detect various combustible gas, such as propane, butane, natural gas, methane, ethane, alcohol, ammonia, hydrogen, gasoline vapor,sulfide, organic solvent steam, smog, lacquer thinner, naphtha, volatile industrial solvent, etc.

Product Features:

High sensitivity, easy operation.
Its sensitivity can be adjusted manually.
Quickly identify and determine the combustible gas leakage location.
Sound and light alarm against combustible gas leakage.
Low battery indication.

Product Specifications:
Resolution: 50ppm (methane)
Alarm Range: 10%-40% LEL
Response Time: 2 seconds (40% LEL)
Operating Temperature: 0 to 50 Celsius
Operating Humidity: 10% to 90%RHÂ
Power Supply: 4 * 1.5V AAA battery
Item Size: approx. 170*60*45mm
Metal hose length: 400mm
Item Net Weight: 350g
Package Size: 285 x 150 x 70mm
Packing weight: 540g

Package include:
1*MS6310 Combustible Gas Indicator
1*User manual
1*Storage BagÂ

After the completion of detection, rotate the knob clockwise to the lowest sensibility position. Press the power supply key to power off, and the green light will turn off.

Warm-up before use
1. In the clean ambient air, push the ON/OFF button to power on the detector and green and red lights will light up and tones will sound as well. Then switch the sensitivity button to the lowest and wait for around 2 minutes until the alarm tones stop.
2. Some intermittent alarm tones may be experienced for a short time as the detector warms up, the alarm will stop sounding when the Combustible Gas Detector is ready for use, if the detector is in an area where combustible gas is present, the alarm may not stop.

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question