Ai -75°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump

Ai -75°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump

The re-designed Ai C80-10 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling...

Vendor :Across International

Type :Recirculating Heater / Chillers

$ 19,999.99
Add to wishlist

The re-designed Ai C80-10 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

Ai C80-10 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

IMPORTANT! -75°C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).

C80-10 circulating chiller features

  • No dry ice or liquid nitrogen needed
  • Advanced PID digital temp controller
  • Built-in chilling fluid filter protects the recirculating pump and prevent blockage
  • All steel construction for durability
  • Cost saving as the water consumption is completely eliminated
  • Built-in casters for mobility
  • Plug and play, no assembly required

Specifications

Recirculating pump Pump type: Centrifugal
Model: 25PLBR30-10
Pumping speed: 8 gallon/min or 30L/min
Power: 280W
Pressure: 1 bar
Radiator Fan motor
Make: Boyoung
Model: YWF 4E-350
Power: 220V 60Hz 0.8A 180W
Rotation speed: 1600rpm
Flow rate: 2500 m2/hour
Cleaning
Clean radiator fins with a fin comb every three months
Working environment
Temperature: 5°C to 35°C
Humidity: < 70%
Temperature controller Temperature range: -80°C to -40°C
Accuracy: +/- 2°C
Type: Digital microprocessor PID controlled
Display unit: Fahrenheit °F
Temperature sensor type Pt100
Housing Powder coated type 42 stainless steel
Built-in swivel casters
Four
Safety Compressor over-heat protection
Short circuit and ground protection
Over-current protection
Over-voltage protection
Over-heat protection
Unit/shipping weight 515 lbs / 615 lbs
Unit/shipping dimensions 38.5 x 25 x 52 inches / 44 x 30 x 64 inches (DxWxH)
Recommended for
50L to 100L rotary evaporators, or 50L jackted reactors